Software Upgrade Instructions for Download
-----------------------------------------------------

1. Disconnect the receiver from the power supply first!!!

2. Copy all the files from the floppy disk to a suitable directory
(CREATE A NEW FOLDER ON your desktop)on your PC.

3. Connect the RS232 port on the back of the STB to COM-1 or COM-2
on your PC. This uses a standard serial cable as you would use for
connection between PC and modem (STRAIGHT INTERNAL CONNECTION). DO NOT USE NULL MODEM CABLE!!

4. Press and hold the "down" and "left" keys on the front panel and hold
them pressed while you reconnect the STB to the power supply.
You will see "dl" displayed on the front panel.

5. Depending the COM ports used, (Usually COM2), double click on the 
correct go file:

go_com1.bat for COM 1 and go_com2.bat for COM 2.


The software will now confirm the tplist.tdf fild has been found and
Establising communications with St-2000 - OK

6. The utility will talk to the box and download the software - once
communications is established the front panel display will show the 
percentage complete (from 1 to 100).

7. When it is finished the front panel will show "done" - disconnect 
the STB from the power supply and re-connect to reset the STB.


Software upgrade is now complete.




